MEDIA MONSTER DVD CONTROL (continued)

Step 2: The Control Freak

Place the control freak in a convenient spot somewhere near the Ghost Bust and DVD player. If you look closely, you'll see the front and back panels are labeled "INPUTS" and "OUTPUTS". Inputs will include the power cable connection (labeled "PWR"), connections for Mat Switches and PIR's (labeled "TRIGGERS" or"J2") and a connection for the Ghost Blast Buster sensor, (labeled "SENSOR""J1"), which we'll discuss later.

Notice that there is a jumper bridging the two center connections on the TRIGGERS or J2 terminal block. This jumper must always be in place, unless you are using a PIR Sensor or other NC (Normally Closed) switching device.

Outputs will include connections for the DVD IR Control Cable, (labeled "DVD"), a connection for the Ghost Bust Blaster's solenoid valve, (labeled "BLASTER" or "J3") and another set of connections for the extra relay (labeled "RELAY" or "J4") which will allow you to connect other items such as lights or additional pneumatic valves, etc. to an internal 12V relay inside the Control Freak. (Have we mentioned how flexible the Control Freak was designed to be?)