The projector's power button is a touch panel on the top of the unit, so you won't be able to feel the button itself. Instead, simply reach up and softly pretend to"pinch" the back end of the projector. This will put your finger in the right position to press the "undetectable" power button. Wait for four seconds until you see or hear the projector come on, (this projector is quiet, so listen closely!)

Aim the projected image at the bust and focus the blue logo letters that first appear over the face so that they're nice and sharply focused in the face area, (where the detail is most important).

Load the DVD into your DVD player. The first image that comes up includes a menu allowing you to choose the length of time in between repeats of the routine(s). (If you're using the Night Frights Control Freak to control the playback of your DVD player, choose the first option on the menu so that playback will respond to your guests activiating a switch mat or PIR sensor).

After choosing a playback option, the next screen you'll see will include a menu of all the available tracks on the DVD as well as some alignment marks to help you align the projector properly with the bust.

Always keeping the necessary 6' between the projector and bust, adjust the projector and the bust to get the alignment marks in the right positions: left and right dots aligned with dots on bust; nameplate should be temporarily green; and the crosshairs should bi-sect the small decorative skull and continue downward along the ornamental ridge there.

TIP: If the alignment markers are aligned well, but the facial features are too far to the left or right, the projector mount may have gotten bent a tad out of skew during installation. Carefully put some downward pressure (on the side of the projector that is furthest from the mount), just enough to bend the mount a bit. Check to see if the face is more properly aligned when the alignment markers are aligned. If it's further out of skew than before, bend it with upward pressure instead.